Integrating eAccelerator Into PHP5 And Lighttpd (Debian Lenny)

November 11, 2010 by: jennyamy

This guide explains how to integrate eAccelerator into PHP5 and lighttpd on a Debian Lenny system. From the eAccelerator project page: “eAccelerator is a free open-source PHP accelerator, optimizer, and dynamic content cache. It increases the performance of PHP scripts by caching them in their compiled state, so that the overhead of compiling is almost completely eliminated. It also optimizes scripts to speed up their execution. eAccelerator typically reduces server load and increases the speed of your PHP code by 1-10 times.”

This document comes without warranty of any kind! I do not issue any guarantee that this will work for you!

1 Preliminary Note

I have tested this on a Debian Lenny server with the IP address 192.168.0.100 where lighttpd and PHP5 are already installed and working (e.g. like in this tutorial). I’ll use lighttpd’s default document root /var/www in this tutorial for demonstration purposes. Of course, you can use any other vhost as well, but you might have to adjust the path to the info.php file that I’m using in this tutorial.

2 Checking PHP5′s Current State

First, before we install eAccelerator, let’s find out about our PHP5 installation. To do this, we create the file info.php in our document root /var/www:

vi /var/www/info.php

<?php
phpinfo();
?>

Afterwards, we call that file in a browser: http://192.168.0.100/info.php

As you see, we have PHP 5.2.6 installed…


Click to enlarge
(JavaScript must be enabled in your browser to view the large image as an image overlay.)

… but eAccelerator isn’t mentioned anywhere on the page:


Click to enlarge
(JavaScript must be enabled in your browser to view the large image as an image overlay.)

3 Installing eAccelerator

Unfortunately, there’s no eAccelerator package for Debian Lenny in the official repositories, therefore we must compile and install it from the sources. Before we can do this, we need to install some prerequisites:

aptitude install build-essential php5-dev bzip2

Now we can download and install eAccelerator like this (make sure that you get the latest version from the eAccelerator web site):

cd /tmp
wget http://bart.eaccelerator.net/source/0.9.5.3/eaccelerator-0.9.5.3.tar.bz2
tar xvfj eaccelerator-0.9.5.3.tar.bz2
cd eaccelerator-0.9.5.3
phpize
./configure
make
make install


eAccelerator is now installed. Now we have to tell our PHP installation that it should make use of eAccelerator. On Debian Lenny with lighttpd, the configuration files for the various PHP 5 modules are stored in the /etc/php5/cgi/conf.d directory, and this directory is referenced in the main PHP5 configuration file /etc/php5/cgi/php.ini, meaning all files in /etc/php5/cgi/conf.d are read in whenever lighttpd is started/restarted. So all we do is create the file /etc/php5/cgi/conf.d/eaccelerator.ini:

vi /etc/php5/cgi/conf.d/eaccelerator.ini

extension="eaccelerator.so"
eaccelerator.shm_size="16"
eaccelerator.cache_dir="/var/cache/eaccelerator"
eaccelerator.enable="1"
eaccelerator.optimizer="1"
eaccelerator.check_mtime="1"
eaccelerator.debug="0"
eaccelerator.filter=""
eaccelerator.shm_max="0"
eaccelerator.shm_ttl="0"
eaccelerator.shm_prune_period="0"
eaccelerator.shm_only="0"
eaccelerator.compress="1"
eaccelerator.compress_level="9"

(You can read up on the various configuration settings on this page: http://www.eaccelerator.net/wiki/Settings.)

As you see, we are using the disk cache directory /var/cache/eaccelerator which we must create now and make it world-writable:

mkdir -p /var/cache/eaccelerator
chmod 0777 /var/cache/eaccelerator

Afterwards, we restart lighttpd so that our new PHP configuration takes effect:

/etc/init.d/lighttpd restart

Afterwards, open info.php again in a browser: http://192.168.0.100/info.php

You should now see eAccelerator mentioned on the page which means it has successfully been integrated and is working as expected (I’ve marked the eAccelerator line in the below screenshot for better visibility):


Click to enlarge
(JavaScript must be enabled in your browser to view the large image as an image overlay.)


Click to enlarge
(JavaScript must be enabled in your browser to view the large image as an image overlay.)

Share and Enjoy:
  • Print
  • Digg
  • Sphinn
  • del.icio.us
  • Facebook
  • Mixx
  • Google Bookmarks
  • Blogplay
Have you found this script useful? Please support author by PayPal donation.

Leave a Reply